Axle Alignment System – Manatec Electronics

Industrial Solution

EOL - Wheel Alignment System

Online Chassis Axle Integration System

Wireless Communication using ZIGBEE RF Technology
Total cycle time of 70 seconds is all it takes for the entire process
Compact design, occupies less floor space
Software guided process sequence
Alignment summary report with Xmr chart for statistical control and process capability analysis
Automatic data pushing (alignment results) to Manufacturer MES server
Battery powered Camera Hub adapters with Auto-charging facility in idle condition, suitable for continuous 16 hours operation
once fully charged for 8 hours
Display of Toe in “degree min”, “degree”, “mm/M”, “mm”
Data manager software for storing Axle alignment results with reference to Axle ID / Date for future reference.
Customized Toe setting software along with Data management software are exclusively developed to suit vehicle manufacturer’s requirement
The system will measure individual toe of each axle hub independent of the distance between the axle hubs.
The proprietary software computes everything internally and displays relevant results like Straight Ahead, Individual Toe, Total Toe and Camber
Measurements can only be stored when all the values are within the tolerance
Max Turn (Lock angle) measurement (Optional)

ZIGBEE Technology

Wireless communication using ZIGBEE RF Technology.

Live Measurement Screen

Parameters such as Toe, Individual toe, Camber & Straight ahead are displayed on the single screen.

Lock Angle (Max Cut) Measurement

The cameras will be incorporated in the hub adaptors itself, hence no separate (ceiling) setup is required for the system to measure the Lock angles.

Data Manager Software

Data manager software for storing Axle alignment results with reference to Axle ID / Date for future reference.

Alignment Results

All results in one screen.

Charging Unit

A battery charging unit is provided to charge the camera hub adaptors and inclinometers during idle condition. The unit also has provision for charging the spare batteries.

Secondary Monitor

Displaying Alignment parameters in larger display for better visibility when viewing from a longer distance.

Barcode Reader & Printer

A Barcode scanner is provided for scanning axle information which is used for quick and easy retrieval of specification from the stored database.

Measurement results can be printed as a Barcode & pasted over the respective Axle.

PCD Bracket

PCD brackets will be provided for mounting the Camera Hub adaptors to different type of axles variant.

Measurement Parameters	Range	Resolution	Accuracy
Individual Toe	± 30mm	0.2mm	± 0.2mm
Total Toe-in	± 60mm	0.2mm	± 0.2mm
Straight Ahead	± 60mm	0.2mm	± 0.2mm
Camber	± 10° 00'	00° 02'	± 00° 02'
Lock to Lock Angle	25° to 55°	00° 07'	± 00° 15'