Jumbo 3D Super – Manatec Electronics

BUS & TRUCKS Model

Jumbo 3D Optima

Simultaneous Run out measurement up to 6 axles by driving in just 1 minute
Simultaneous Caster & Kingpin measurement of twin steer axles in just 1 minute
Measurement of all wheel alignment angles in just 3 minutes
No electronics on wheels
No jack up of axle / No pushing mechanism for runout measurement
Alignment of Trailers up to 8 axles in reverse parking by 2 steps
Simultaneous alignment of Trailers up to 3 Axles in forward parking & reverse parking
Data manager reports can be exported
Power failure data protection (Resuming of current job in which stage the power failure happened)
Display of Toe in “deg. min"/“deg.”/ “mm"/“mm/M” / “inch” & other angles in “deg.”/“deg. min”/deg. fraction (1½°)
Drive Through option
Camera coverage up to 19 Mtrs (Camera to last Target plate)

Innovative Image-Processing Technology

Jumbo 3D uses latest, innovative, digital-imaging technology using 4 digital cameras for data-acquisition. High resolution 10 Megapixel digital cameras operate with intelligent software & capture seamless images of targets

One Shot Run out Compensation

Jumbo 3D Super 6A uses 12 target plates at a time to measure simultaneous Run out

No Electronics on Wheels

No expensive service bills if accidentally target plate is dropped

Calibration not required

Free from battery discharge issues

Compact and light weight

Robust Rotary Plates

4 Nos Rotary Plates capable of handling multi- axle Bus / Trucks capable of handling 7 tons capacity

One Shot Caster Swing for Twin Steer Axles

Caster swing can be performed for twin steer axles simultaneously.

Parallelism Adjustment

Alignment of Front twin steer axles to maintain parallel condition

Thrust / Scrub Angle Adjustment

Alignment of drive and tandem axles in multi axle trucks

Universal Wheel Bracket

Smart Support without Internet (Optional)

Highly user-friendly Wi-Fi enabled Tablet & Mobile device to display alignment results & to operate PC from Alignment bay. Avoids multiple trips to PC console.

Measurement Paraments	Range	Accuracy
Camber (Front / Rear)	± 15° 00'	± 00° 02'
Caster	± 28° 00'	± 00° 05'
Kingpin Inclination	± 25° 00'	± 00° 05'
Teo (Front/Rear)	± 20° 00'	± 00° 02'
Total Toe	± 40° 00'	± 00° 04'
Setback (Front / Rear )	± 25 mm	± 2 mm
Scrub / Thrust Angle	± 10° 00'	± 00° 02'
Runout	± 10° 00'	± 00° 02'
Included Angle	± 40° 00'	± 00° 05'
Track width	Actual	± 2 mm
Power Supply (wheel Aligner)	230V, 50Hz / 110V AC, 60Hz
Power	250 W
Operating temperature	0°-50°C

Wheel brackets(12"-24")

Jumbo 3D 6A – 12 Nos.

Jumbo 3D 5A – 10 Nos.

Jumbo 3D 4A – 8 Nos.

Target plates

Jumbo 3D 6A – 12 Nos.

Jumbo 3D 5A – 10 Nos.

Jumbo 3D 4A – 8 Nos.

Rotary Plates – (7 ton) with Spacers

Jumbo 3D 6A – 4 Nos.

Jumbo 3D 5A – 4 Nos.

Jumbo 3D 4A – 4 Nos.

Steering Lock

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Brake Pedal Lock

Jumbo 3D 6A – 1 Nos.

Jumbo 3D 5A – 1 Nos.

Jumbo 3D 4A – 1 Nos.

PC console with Windows 10 IoT,
Key board & Mouse

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

LED monitor (21.5") HDMI / DP interface

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

LED monitor secondary (21.5")
HDMI / DP interface

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Wheel stoppers

Jumbo 3D 6A – 2 Nos.

Jumbo 3D 5A – 2 Nos.

Jumbo 3D 4A – 2 Nos.

Truck alignment & Data manager software

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Target stands

Jumbo 3D 6A – 3Tx4 Nos.

Jumbo 3D 5A – 3Tx2 & 2Tx2 Nos.

Jumbo 3D 4A – 2Tx4 Nos.

Chain Block with Ratchet
(Rear single axle adjuster)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Steering lock (LCV)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Brake pedal lock (LCV)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Front target plate extension spacer
150 mm long

Jumbo 3D 6A – 6 Nos.

Jumbo 3D 5A – 6 Nos.

Jumbo 3D 4A – 6 Nos.

Adaptor for rim locking pins with storage box

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Wheel bracket extension adaptors
upto 30”

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Rotary plate ramp

Jumbo 3D 6A – 6 Nos.

Jumbo 3D 5A – 6 Nos.

Jumbo 3D 4A – 6 Nos.

Frame reference gauge

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Frame offset gauge

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Tyre dia guage

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Drawbar gauge (Full trailer)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

4 shaft Calibration kit

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Extension spacer (600 mm)
for Drive Thru’ calibration kit

Jumbo 3D 6A – 4 Nos.

Jumbo 3D 5A – 4 Nos.

Jumbo 3D 4A – 4 Nos.

Double end rim locking pins
(Steel rims)

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Double end rim locking pins
(Low profile Steel rims)

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Double end rim locking pins
(Long bolt rims)

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 48 Nos.

Jumbo 3D 4A – 32 Nos.

CVT (Constant voltage transformer)
1KVA

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Drive Thru’ kit

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Printer

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Jumbo 3D Super – English

Innovative Image-Processing Technology

One Shot Run out Compensation

No Electronics on Wheels

Robust Rotary Plates

One Shot Caster Swing for Twin Steer Axles

Parallelism Adjustment

Thrust / Scrub Angle Adjustment

Universal Wheel Bracket

Smart Support without Internet (Optional)

Quick Links

Contact