EOL – Wheel Alignment System – Manatec Electronics

Industrial Solution

Axle Alignment System

Online Chassis Axle Integration System

World’s 1st 3D Wheel Aligner for Multi-Axle Trucks, Buses & Trailers.
With Innovative Image Processing technology the Drive through version of JUMBO 3D Super customized with provision for Simultaneous alignment upto 6 Axles is a perfect solution for End of the Line (EOL) – Wheel Alignment.
One shot run-out compensation of all the 6 Axles.
One shot Caster swing for Twin steer axles.
Measures all the 6 axles within 3 minutes.
No Electronics on Wheels hence less failure & Maintenance.
Magnetic Wheel Brackets enables the user for quick clamping of wheels , hence reduced cycle time & Higher Productivity.
Software guided process sequence avoiding manual interference.
Automatic data pushing to Manufacturer Engineering System (MES).
Barcode scanner provided for scanning the Vehicle Identification Number (VIN) which is used for quick & Easy retrieval of specification from the stored database.
Extra monitor provided to view screen underneath from the PIT.
Smart control using Wi-Fi enabled tablet & Mobile device to display alignment results and to operate the PC from Alignment bay, Avoids multiple trips to PC console.

Innovative Image-Processing Technology

Jumbo 3D uses latest, innovative, digital-imaging technology using 4 digital cameras for data-acquisition. High resolution 10 Megapixel digital cameras operate with intelligent software & capture seamless images of targets.

One Shot Run out Compensation

Jumbo 3D Super 6A uses 12 target plates at a time to measure simultaneous Run out.

No Electronics on Wheels

No expensive service bills if accidentally target plate is dropped.

Calibration not required

Free from battery discharge issues

Compact and light weight

Robust Rotary Plates

4 Nos Rotary Plates capable of handling multi- axle Bus / Trucks capable of handling 7 tons capacity.

Thrust / Scrub Angle Adjustment

Alignment of drive and tandem axles in multi axle trucks.

Smart Support without Internet (Optional)

Highly user-friendly Wi-Fi enabled Tablet & Mobile device to display alignment results & to operate PC from Alignment bay. Avoids multiple trips to PC console.

Measurement Paraments	Range	Accuracy
Camber (Front / Rear)	± 15° 00'	± 00° 02'
Caster	± 28° 00'	± 00° 05'
Kingpin Inclination	± 25° 00'	± 00° 05'
Teo (Front/Rear)	± 20° 00'	± 00° 02'
Total Toe	± 40° 00'	± 00° 04'
Setback (Front / Rear )	± 25 mm	± 2 mm
Scrub / Thrust Angle	± 10° 00'	± 00° 02'
Runout	± 10° 00'	± 00° 02'
Included Angle	± 40° 00'	± 00° 05'
Track width	Actual	± 2 mm
Power Supply (wheel Aligner)	230V, 50Hz / 110V AC, 60Hz
Power	250 W
Operating temperature	0°-50°C

Wheel brackets(12"-24")

Jumbo 3D 6A – 12 Nos.

Jumbo 3D 5A – 10 Nos.

Jumbo 3D 4A – 8 Nos.

Target plates

Jumbo 3D 6A – 12 Nos.

Jumbo 3D 5A – 10 Nos.

Jumbo 3D 4A – 8 Nos.

Rotary Plates – (7 ton) with Spacers

Jumbo 3D 6A – 4 Nos.

Jumbo 3D 5A – 4 Nos.

Jumbo 3D 4A – 4 Nos.

Steering Lock

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Brake Pedal Lock

Jumbo 3D 6A – 1 Nos.

Jumbo 3D 5A – 1 Nos.

Jumbo 3D 4A – 1 Nos.

PC console with Windows 10 IoT,
Key board & Mouse

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

LED monitor (21.5") HDMI / DP interface

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

LED monitor secondary (21.5")
HDMI / DP interface

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Wheel stoppers

Jumbo 3D 6A – 2 Nos.

Jumbo 3D 5A – 2 Nos.

Jumbo 3D 4A – 2 Nos.

Truck alignment & Data manager software

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Target stands

Jumbo 3D 6A – 3Tx4 Nos.

Jumbo 3D 5A – 3Tx2 & 2Tx2 Nos.

Jumbo 3D 4A – 2Tx4 Nos.

Chain Block with Ratchet
(Rear single axle adjuster)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Steering lock (LCV)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Brake pedal lock (LCV)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Front target plate extension spacer
150 mm long

Jumbo 3D 6A – 6 Nos.

Jumbo 3D 5A – 6 Nos.

Jumbo 3D 4A – 6 Nos.

Adaptor for rim locking pins with storage box

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Wheel bracket extension adaptors
upto 30”

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Rotary plate ramp

Jumbo 3D 6A – 6 Nos.

Jumbo 3D 5A – 6 Nos.

Jumbo 3D 4A – 6 Nos.

Frame reference gauge

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Frame offset gauge

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Tyre dia guage

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Drawbar gauge (Full trailer)

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

4 shaft Calibration kit

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Extension spacer (600 mm)
for Drive Thru’ calibration kit

Jumbo 3D 6A – 4 Nos.

Jumbo 3D 5A – 4 Nos.

Jumbo 3D 4A – 4 Nos.

Double end rim locking pins
(Steel rims)

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Double end rim locking pins
(Low profile Steel rims)

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 40 Nos.

Jumbo 3D 4A – 32 Nos.

Double end rim locking pins
(Long bolt rims)

Jumbo 3D 6A – 48 Nos.

Jumbo 3D 5A – 48 Nos.

Jumbo 3D 4A – 32 Nos.

CVT (Constant voltage transformer)
1KVA

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Drive Thru' kit

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

Printer

Jumbo 3D 6A – 1 No.

Jumbo 3D 5A – 1 No.

Jumbo 3D 4A – 1 No.

EOL - Wheel Alignment System